Xerox Phaser 3610

Service Parts Disassembly
Phaser 3610, WorkCentre 3615 Service Manual4-114
4. Remove the DADF Assembly. (Figure 2)
a. Remove 3 (silver, tapping, 8mm) on each side of the IIT Assembly.
b. Remove 1 screw (silver, hexagon head with flange, stud type, 10mm) on the left side.
c. Slide the assembly to the left to release the studs from the chassis holes, and lift to remove
the IIT/DADF.
Figure 2
Replacement
1. Replace in reverse order.
s3610-105
b)
c)
a)
a)