Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-289
FIP 1. 320
116-719 XPIF Parameter Cancelled
Cause:
Due to conflict among multiple print instructions, print instructions are ignored.
Solution:
Make sure that you are using the correct printer driver.
FIP 1. 321
116-721 Collate Full
Cause:
Unable to collate due to insufficient memory.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Split the document into blocks to decrease the number of pages to be collated.
2. Upgrade SD CARD as required.
3. Take corrective actions at the host side.
To Next Page
Loading...
