Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-180
FIP 1. 123
031-523 Problem with share name in SMB scan server
Cause:
Problem with share name in SMB scan server.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check SMB Server connection, or check share name you specified.
2. Perform the following in sequence.
• " Network System Fault Check"
• " Network-related Details Check Flow"
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace (REP 5.1 ESS PWB).
FIP 1. 124
031-524 SMB Scan User Over limit
Cause:
Exceed the upper limit of the number of SMB scan users.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the number of users who use the server at the same time is not exceeding the upper
limit.
2. Perform the following in sequence.
• " Network System Fault Check"
• " Network-related Details Check Flow"
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace (REP 5.1 ESS PWB).