Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-152
FIP 1. 65
016-791 USB Memory Removal Error (During Read)
Cause:
USB memory is removed while memory reading job is being executed.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Check the USB Memory.
2. Ensure that the error is replicated after the printer is powered Off and then On, and then
change the USB.
3. Take corrective actions at the host side.
FIP 1. 66
016-799 Job Environment Violation
Cause:
Print condition conflicts with other condition.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Ensure that the printer configuration on the printer driver conforms to the printer you are
using.
2. Take corrective actions at the host side.