Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-153
FIP 1. 67
016-923 Wireless Password Error
Cause:
Wireless Password is wrong.
Solution:
The machine will recover after the OK button is pressed or message is displayed for specified
time.
If the error persists:
1. Modify the setting WEP Key or WPA Pass phrase.
2. Change the password.
FIP 1. 68
016-924 Wireless Setting Error
Cause:
WEP AP Connected Error.
Solution:
1. Press set and try again.
2. Reinstall the WIRELESS ADAPTER.
3. If the problem cannot be solved, configure the wireless settings again.
FIP 1. 69
016-930 USB Host Error
Cause:
Warning when unsupported device is installed to USB host.
• Detect installation of device of which class driver cannot be found.
• Detect installation of device that class driver judges not to support.
• Detect installation of Low-Speed device.
Solution:
1. Devices not available are connected to the USB port.
• Remove the devices from the USB port.
2. If the error persists, ensure that the error is replicated after the printer is powered Off and
then On, and then replace (REP 5.1 ESS PWB).