Xerox Phaser 3610

Image Quality
Phaser 3610, WorkCentre 3615 Service Manual3-32
4
Change the Bitmap Smoothing setting to On via
printer driver.
- To change the Bitmap Smoothing setting, use
(Bitmap Smoothing) on the Advanced tab of
the printer driver.
Is the image printed correctly?
Troubleshooting
complete.
Go to step 5.
5
Check the Toner Type.
Is the XEROX Toner seated?
Go to step 6.
Replace the toner with
XEROX toner.
6
Reseat the ROS Assembly.
Is the image printed correctly?
Troubleshooting
complete.
Replace (REP 3.1 ROS
Assembly).
Troubleshooting Procedure (Continued)
Step Actions and Questions Yes No