Xerox Phaser 3610

Service Parts Disassembly
Phaser 3610, WorkCentre 3615 Service Manual 4-33
10. Prepare the MCU PWB. (Figure 2)
a. Release 4 clips that secure the Top Frame Assembly to remove it from the chassis.
b. Release 3 clips that secure the MCU PWB cover to remove it from the chassis.
c. Disconnect P/J12 and P/J14 from the MCU PWB, then release the harness from the harness
guide.
Figure 2
P/J14P/J12
b)
c)
a)