Xerox Phaser 3610

Wiring
Phaser 3610, WorkCentre 3615 Service Manual 7-41
Notations Used in the Wiring Diagrams
The following table lists the symbols used in the wiring diagrams.
Symbol Description
Denotes a Plug.
Denotes a Jack.
Denotes Pin yy and Jack yy of the connector Pxx and Jxx.
Denotes a Jumper Point (JPxxx/xxx). Each end of the Jumper connection has
a numeric designation.
Denotes the parts.PL X.Y.Z implies the item “Z” of plate (PL) “X.Y” in Parts
List.
Denotes functional parts attached with functional parts name.
Denotes the control and its outline in the PWB.