Zynq-7000 AP SoC and 7 Series FPGAs MIS v4.1 279
UG586 November 30, 2016
www.xilinx.com
Chapter 2: QDR II+ Memory Interface Solution
6. Click Next to open the Add Existing IP (Optional) page (Figure 2-6). If the IP is already
created, the XCI file generated by the IP can be added to the project and the previous
created IP files are automatically added to the project. If the IP was not created earlier,
proceed to the next page.
X-Ref Target - Figure 2-6
Figure 2-6: Add Existing IP (Optional)
To Next Page
Loading...
