Xilinx Zynq-7000

Zynq-7000 AP SoC and 7 Series FPGAs MIS v4.1 28
UG586 November 30, 2016
www.xilinx.com
Chapter 1: DDR3 and DDR2 SDRAM Memory Interface Solution
11. Click IP Catalog on the Project Manager window to open the IP catalog window. The
Vivado IP catalog window appears on the right side panel (see Figure 1-12, highlighted
in a red circle).
12. The MIG tool exists in the Memories & Storage Elements > Memory Interface
Generators section of the IP catalog window (Figure 1-12) or you can search from the
Search tool bar for the string “MIG.”
X-Ref Target - Figure 1-12
Figure 1-12: IP Catalog Window – Memory Interface Generator
Send Feedback