R5905948 /12 Event Master Devices118
The following sections describe how to perform the configuration of each part of the system in detail:
• “Configuration Menu > Adjustment > Unit Configuration”, page 118
• “Configuration Menu > Adjustment > Input Configuration”, page 122
• “Configuration Menu > Adjustment > Background Configuration”, page 133
• “Configuration Menu > Adjustment > Output Configuration”, page 136
• “Configuration Menu > Adjustment > Destination Configuration”, page 145
• “Configuration Menu > Adjustment > Custom Formats Configuration”, page 172
• “Configuration Menu > Adjustment > External Devices Configuration”, page 175
6.12 Configuration Menu > Adjustment > Unit
Configuration
General
In the unit configuration adjustments panel, the user can define and adjust unit (device) specific parameters.
How to access the unit configuration adjustments panel
1. Select the device (unit) that you want to configure. Refer to “Configuration Menu > System diagram area”,
page 112 and see the subsection “How to select device.”
The device is selected. The device is highlighted in blue in the System diagram area and the name of device
is indicated in the Adjustment tab in the Adjustment area.
2. Click on the Adjustment tab in the Adjustment area.
The adjustment panel dedicated to the unit is displayed.
EM GUI orientation
To Next Page
Loading...
Need help?
General
