R5905948 /12 Event Master Devices14
1.1 About this guide
This manual
This User's guide describes how to install and operate the Event Master units (E2 and S3 series) and their
controllers (EC-50 and EC-200/EC-210). The User's Guide is designed to be a reference tool in the everyday
work of the user with the product. It contains a complete description of the hardware components and the
control software. The manual also includes all the necessary instructions on how to upgrade firmware, install
spare parts and perform any hardware upgrades.
Barco provides a 3-year parts and labor warranty for all hardware components. Please refer to
Appendix E (“Warranty”, page 575) for specific details regarding the warranty terms.
Available System documentation
This guide is part of the documentation set describing the Event Master products.
Guide Article number
User Guide R5905948
E2 Quick Start Guide 26-1205004-00
S3 Quick Start Guide 26-1401004-00
EX Quick Start Guide 26-1502004-00
EC-30 Quick Start Guide 60600356
EC-50 Quick Start Guide 60600332
EC-200 Quick Start Guide 60600333
E2 Safety Guide R5905947
S3 series Safety Guide R5906016
EC series Safety Guide R5906018
EX Safety Guide R5906020
Service Guide R5905949 (Only available to Customer Service
partners)
A printed copy of Safety Guides and Quick Start Guides is included in the shipping box of the Event Master
devices. Please check online for the other documents.
Always check for the latest version of all documents on www.barco.com.
1.2 Record of changes
Overview
Revision
Changes
00 Initial version
01
• Changes initiated by:
- New software version (V2.0).
- S3-4K and EC-50 product releases.
• In the entire of the document, the references to E2 have been replaced by reference to
the Event Master processors.
• A record of changes (this section) has been added.
• S3–4K product has been added. Chapters concerned by this new Event Master
processor have been modified:
- Description in General chapter + How to install S3 in a rack.
- Detailed explanations concerning new hardware in the Hardware Orientation
chapter.
Introduction
To Next Page
Loading...
Need help?
General
