Barco Event Master E2 Series User Manual

R5905948 /12 Event Master Devices178
Add, Test, and Store commands
On the External Devices Adjust tab the user may add,
test, and store commands for external devices.
1. Click on the +Add new Command to Device
button to add a command to the selected external
device.
2. Enter the command in the command window.
The user may type or paste a copied command
into the empty window.
3. Click on the Test Selected Command button.
The Test Result reads:
- Failure: before the command is tested and if
the command fails the test.
- In Progress: while the command is being
tested.
- Success: if the network communication passes
the test.
4. Correct the command if it fails the test.
5. Click on the Store button, once the command has
passed the test, to store the command to the
selected external device.
Once a command has been added, tested, and
stored, the text of the command appears under the
command in the Commands list.
6.20 Configuration Menu > Linking
General
This part of the System configuration page lists devices available on the local network and allows adding them
to a Linked System Set up.
EM GUI orientation

Barco Event Master E2 Series Specifications

General

Brand	Barco
Model	Event Master E2 Series
Category	DJ Equipment
Language	English