Barco Event Master E2 Series User Manual

R5905948 /12 Event Master Devices522
18.1 Servicing
General
Given the low failure rate experienced on this device, it is extremely rare to have to change parts on the EC-50
controller.
In the unlikely event your EC series controller requires service, please refer to the Return Material
Authorization section in this manual prior to sending the unit back to the Barco Service Department.
The only parts that the user may have to change by itself is the work light and power fuse. The work light is a
spare part provided by Barco (see spare parts list bellow). The fuse is not provided by Barco.
EC-50 Overview
Orientation and main components.
Front:
Image 18-1: EC-50 controller (Front view)
1 work light connector
2 Touch screen
3 Buttons of presentation the presentation video controller
4 T-bar
Rear:
EC-50 Maintenance

Barco Event Master E2 Series Specifications

General

Brand	Barco
Model	Event Master E2 Series
Category	DJ Equipment
Language	English