Barco Event Master E2 Series User Manual

R5905948 /12 Event Master Devices112
Image 6-7
How to manually add a device into the selected system
To manually add a device, use the “Manual Add” section.
1. Enter the IP address.
2. Press the “Add” button.
Image 6-8
Unit is added and retrieves the available configuration in the Device.
6.9 Configuration Menu > System diagram area
General
The system is represented graphically in this part of the System configuration page. It is here that the user can
select a system (or create a new one), or select a system element ( inputs, outputs, destinations …)
Description
The diagram area graphically represents the devices and destinations that compose the system.
EM GUI orientation

Barco Event Master E2 Series Specifications

General

Brand	Barco
Model	Event Master E2 Series
Category	DJ Equipment
Language	English