R5905948 /12 Event Master Devices172
Feathering submenu
• Canvas shows the actual pixel ratio for the full
blend.
• Select the region where feathering will be
performed. All edges can be separately selected
and have a different value of Feather and Gamma.
The adjustment can be made by moving the slider,
entering the value manually in the box or click on
the plus and minus.
Note: The Feathering and Gamma sliders are
disabled, until at least one edge that can be
feathered is selected. Gray edges are unselected;
blue edges are selected.
• Activate or deactivate the feather for the selected
edge by checking the Feathering checkbox.
• Adjust the Feathering Gamma (shape of the curve)
and the width of the feathering region.
• The icons above are shortcuts for edge selection.
• The Arrow icon allows the small windows
representation of the output map to be copied to
the workspace for ease of edge selection.
6.18 Configuration Menu > Adjustment > Custom
Formats Configuration
General
In the Custom Format configuration menu users can add and modify custom resolution configurations.
EM GUI orientation
To Next Page
Loading...
Need help?
General
