Barco Event Master E2 Series User Manual

R5905948 /12 Event Master Devices98
Image 5-29: Front Panel Locked Message
2. To disable the front panel lock, press and hold the SEL and ESC buttons simultaneously for 3 seconds. When
the panel is unlocked, the display screen displays the Status menu.
5.13 System menu > Admin Lock
General
When the Admin Lock is enabled, all Event Master toolset GUI connections to the processor are not allowed to
delete Inputs, Outputs, Destinations, Presets, User Keys, Cues, or External Devices. Users are allowed
operator-level functionality to recall Presets and Cues and to transition.
How to enable and disable the Admin Lock
1. On the System menu, scroll to Admin Lock and press SEL.
Image 5-30: Admin Lock
2. Turn the ADJUST knob to toggle between Off (disabled) and On (enabled).
5.14 System Menu > WebApp Lock
General
When the WebApp Lock is off (disabled), the settings page hosted in the EMP is accessible through a web
browser, as well as through the Settings menu in the EMTS GUI. When the WebApp Lock is enabled, the
WebApp is in read-only mode, and no settings can be changed.
How to enable and disable the WebApp Lock
1. On the System menu, scroll to WebApp Lock and press SEL.
Image 5-31: WebApp Lock
2. Turn the ADJUST knob to toggle between Off (disabled) and On (enabled).
Front Panel Menu orientation

Barco Event Master E2 Series Specifications

General

Brand	Barco
Model	Event Master E2 Series
Category	DJ Equipment
Language	English