EasyManuals Logo

Barco Event Master E2 Series User Manual

Barco Event Master E2 Series
584 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
R5905948 /12 Event Master Devices62
4K / UHD 4 1 SMPTE 424M
SMPTE 2048-2
Image mapping: Quadrants
3840x2160 @ 50/59.94/60 as 4x 3G-SDI
4096x2160 @ 50/59.94/60 60 as 4x 3G-SDI
Level A and B supported
4K / UHD 4 1 SMPTE ST 425-5 Image mapping: 2 Sample Interleave
Subdivision (2SI)
3840x2160 @ 23.98/24/25/29.97/30 as 4x HD-
SDI
4096x2160 @ 23.98/24/25/29.97/30 as 4x HD-
SDI
3840x2160 @ 50/59.94/60 as 4x 3G-SDI
4096x2160 @ 50/59.94/60 60 as 4x 3G-SDI
Level A and B supported
SDI
Serial Digital Interface (SDI) is a serial link standardized by the Society of Motion Picture and
Television Engineers (SMPTE). SDI transmits uncompressed digital video over 75-ohm coaxial
cable within studios, and is seen on most professional video infrastructure equipment.
4.4 Dual Link DVI Input Card
General
The dual link DVI input card includes two DVI-I dual-link connectors that can support a single or dual-link DVI
video signal.
Although the DVI-I connectors includes pins that support analog signals, the DVI card doesn't
support analog signals. If you need to connect an analog signal to the unit, you need to employ an
external A/D converter.
The figure below illustrates the dual link DVI input card's rear panel connectors:
Hardware orientation

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Barco Event Master E2 Series and is the answer not in the manual?

Barco Event Master E2 Series Specifications

General IconGeneral
BrandBarco
ModelEvent Master E2 Series
CategoryDJ Equipment
LanguageEnglish

Related product manuals