Barco Event Master E2 Series

R5905948 /12 Event Master Devices 63
Image 4-9: Dual Link DVI Input Card Rear Panel
1 DVI-I dual-link connector — DVI 1 with an LED that turns on green when a valid sync has been
detected
2 DVI-I dual-link connector — DVI 2 with an LED that turns on green when a valid sync has been
detected
Features
• Process up to 2 signals independently
• 2x DVI-I dual-link connector
• Support for single or dual-link DVI video signal
• Each input channel includes an LED that turns green when a valid sync is detected.
Specifications
• DVI 1.0 Specification
• Maximum H Active: 4,096, Maximum V Active: 3,072
• Supported format:
- All single link DVI formats up to 165 MHz
- All dual link DVI formats up to 330 MHz
- 4K/UHD Supported:
◦ 3,840x2,160/ 23.98/24/25/29.97/30 input via 1x DVIDL, 2x DVISL (L and R half) or 4x DVISL
(quadrants)
◦ 3,840x2,160/ 50/59.94/60 input via 2x DVIDL (L and R half) or 4x DVISL (quadrants)
◦ 4,096x2,160/ 23.98/24/25/29.97/30 input via 2x DVISL (L and R half) or 4x DVISL (quadrants)
◦ 4,096x2,160/ 50/59.94/60 input via 2x DVIDL (L and R half) or 4x DVISL (quadrants)
◦ 4,096x2,400/ 23.98/24/25/29.97/30 input via 2x DVISL (L and R half) or 4x DVISL (quadrants)
◦ 4,096x2,400/ 50/59.94/60 input via 2x DVIDL (L & R half) or 4x DVISL (quadrants)
- EDID version 1.3 compatible
- HDCP version 1.4 compatible
Hardware orientation