R5905948 /12 Event Master Devices 153
More about Super AUX Destinations
As Super Destinations can be understood as groups of Screen Destinations, Super AUX Destinations can be
understood as groups of AUX Destinations. Once a Super AUX Destination and more than one AUX
Destinations have been created, the AUX Destinations can be assigned to a Super AUX Destination by
dragging and dropping them on the Super AUX Destination in the Diagram area of the Configuration menu.
AUX and Super AUX Destinations do not have Layers.
Aux Scaling mode for Super AUX Destinations is fixed in All mode.
Super AUX Destinations on the Configuration Menu
Image 6-27: Super AUX Destinations on the Configuration Menu
1 Network resource area
2 System diagram area
3 Adjustment area
4 Add and delete Destination buttons
• Add Screen Destination
• Add Aux Destination
• Add Super Destination
• Add Super AUX
• Delete Destination(s)
5 Super Destinations
• SuperDest1
6 Super AUX Destinations
• SuperAux1
7 Screen Destinations
• ScreenDest1
• ScreenDest2
8 Aux Destinations
• AuxDest1
• AuxDest2
9 Drag and drop AuxDest1 and AuxDest2 into SuperAux1.
Creating a Super AUX Destination and assigning AUX Destinations
1. Add Super Destinations, Super AUX Destinations, Screen Destinations, and AUX Destinations, using the
add Destination buttons.
2. Assign Outputs to the Destinations.
3. Drag and drop the AUX Destinations onto the Super AUX Destination(s).
Note: Source can be updated in an Aux by dragging and dropping a new source into the Aux or into the
Super Aux of which the Aux is a part.
EM GUI orientation
To Next Page
Loading...