Barco Event Master E2 Series

R5905948 /12 Event Master Devices32
Model
Inputs via input cards
- 4x HDMI 1.4 (297 Mpix/sec max)
- 4x DisplayPort 1.1 (300 Mpix/sec max)
S3–4K Jr.
• 8 inputs via 2 Event Master Series 1x input cards:
- Up to 2x 4K inputs – each input card supports up to 1x 4K@60p
- 4x SD/HD/3G SDI
- 2x HDMI 1.4 (297 Mpix/sec max)
- 2x DisplayPort 1.1 (300 Mpix/sec max)
EX
• Two card slots, each of which may support any E2 input or output card
- Up to 8 inputs via 2 input cards or 8 outputs via 2 output cards (same cards
as E2 Event Master processor)
(4 inputs and 4 outputs, using one card of each type)
- Inputs can be distributed to other processors via the link cable or to a
locally installed output card.
Outputs
Model E2 Gen 2 E2 E2 Jr. S3–4K S3–4K Jr. EX
Output card slots 3x 3x 3x 2x 2x 2x
Multiviewer card
slots
1x 1x 1x 1x 1x NA
The last slot on E2 Gen 2, E2, and E2 Jr. (Slot #14) and on S3–4K and S3–4K Jr. (Slot #9) may be designated
as either a Multiviewer (MVR) card slot or as an Output card slot. See“Configuration Menu > Adjustment > Unit
Configuration”, page 118 for more details.
Card type Connector Type
DisplayPort output card (Gen 2) 4x DisplayPort 1.2 connectors
HDMI output card (Gen 1) 4x HDMI 1.4 connectors
SDI output card (Gen 1) 4x BNC connectors supporting 3G-SDI
HDMI 2.0 output card (Gen 2) 4x HDMI 2.0 connectors
Tri-Combo output card (Gen 2) 1x DP 1.2 connector
1x HDMI 2.0 connector
4x BNC connectors supporting 12G-SDI
HDMI Multi-viewer card (Gen 1) 4x HDMI 1.4 connectors
HDMI 2.0 Multiviewer card (Gen 2) 4x HDMI 2.0 connectors
The EX expansion box does not ship with cards; cards must be purchased separately. Each EX expansion
box has two general purpose cards slots, each of which may support any E2 input or output card.
Depending on the model, each Event Master processor is shipped with the following output cards:
General