Barco Event Master E2 Series User Manual

R5905948 /12 Event Master Devices356
EC-200/EC-210 Overview
Image 11-7
1 2 x Script Light
2 Work Light
3 Red Backlight
Description
Script Light
EC-50 and EC-200/EC-210 controllers are respectively supplied with one and two flexible script light
connections equipped with LED light. Light can be adjusted for brightness in the Event Master Toolset Settings
menu page in the tab User Prefs, only available when hardware is connected.
Work light
White work light under the hand rest is available as additional light directly in front of the console. Light can be
turned on and off in the Event Master Toolset Settings menu page in the tab User Prefs, only available when
hardware is connected.
Red backlight
The Red backlight indicates, from the rear, that the console is powered on and also serves as a design
element. Light can be turned on and off in the Event Master Toolset Settings menu page in the tab User Prefs,
only available when hardware is connected.
Controller Configuration

Barco Event Master E2 Series Specifications

General

Brand	Barco
Model	Event Master E2 Series
Category	DJ Equipment
Language	English