R5905948 /12 Event Master Devices436
How to remove the 1RU Fan cable
1. Make sure the unit is placed in the upright position and the 3RU and 1RU fan trays are removed.
2. Locate the 1RU cable connector that is exposed after the 1RU fan tray is removed. The connector is attached
on a metal bracket that is horizontally mounted in the chassis.
Image 14-89
3. Locate the snap lock on the connector and push it back to release the connector from the bracket.
Image 14-90
4. Push the connector to the left until the slots in the metal bracket align with the flanges on the connectors.
E2 Maintenance
To Next Page
Loading...