Barco Event Master E2 Series

R5905948 /12 Event Master Devices 559
- success: (0=success, anything else is an error)
• Example:
- {"params": {"id": 0, "newPresetName": " newPresetName "},
"method":"renamePreset", "id":"1234", "jsonrpc":"2.0"}
- {"params": {"presetName": "NewPreset", "newPresetName": "NewPresetName"},
"method":"renamePreset", "id":"1234", "jsonrpc":"2.0"}
- {"params": {"presetSno": 1.00, "newPresetName": " newPresetName "},
"method":"renamePreset", "id":"1234", "jsonrpc":"2.0"}
activatePreset
• Definition:
- Recall a Preset on the Event Master processor. User can recall Preset with id, Preset serial number, or
Preset name.
- Send any one of the parameters to recall Preset.
• Request params:
- params: {"id": x, "type": x}
- params: {"presetSno": x.y, "type": x}
- params: {"presetName": "PresetName"}
◦ “type”—0 to recall in preview (default), 1 to recall in program.
This is not a mandatory parameter but should be given when the user wants to recall a Preset in
program.
• Response:
- response: null
- success: (0=success, anything else is an error)
• Example:
- {"params": {"id": 0, "type": 0}, "method":"activatePreset",
"id":"1234", "jsonrpc":"2.0"} //Recall in preview with id 0.
- {"params": {"presetName": "abc" }, "method":"activatePreset",
"id":"1234", "jsonrpc":"2.0"} //Recall in preview with preset name "abc".
- {"params": {"presetSno": 1.00, "type": 1}, "method":"activatePreset",
"id":"1234", "jsonrpc":"2.0"} //Recall in program with presetSno 1.
recallNextPreset
• Definition:
- Recall the next Preset on the Event Master processor.
No parameter is required.
- Make sure that the user has at least recalled one Preset. Web app recalls the next Preset from the last
Preset recalled.
• Request:
- params: {}
• Response:
- response: null
- success: (0=success, anything else is an error)
- An error is shown if there was no last recalled Preset or if there is no next Preset in the list.
• Example:
- {"params": {}, "method":"recallNextPreset", "id":"1234", "jsonrpc":"2.0"}
deletePreset
• Definition:
- Delete a Preset on the Event Master processor.
User can delete Preset with id, Preset serial number, or Preset name.
- Send any one of the parameters to delete Preset.
Remote Control Protocol