Barco Event Master E2 Series

R5905948 /12 Event Master Devices566
"CardStatusLabel":"Ready","CardTypeID":50,"CardTypeLabel":"VPU Scaler",
"CardID":"thisissometextforid504"}},{"Card":{"CardStatusID":0,
"CardStatusLabel":"Not Installed","CardTypeID":255,"CardTypeLabel":
"Unknown","CardID":"Undefined"}},{"Card":
{"CardStatusID":2,"CardStatusLabel":
"Ready","CardTypeID":50,"CardTypeLabel":"VPU Scaler","CardID":
"thisissometextforid505"}},{"Card":
{"CardStatusID":2,"CardStatusLabel":"Ready",
"CardTypeID":50,"CardTypeLabel":"VPU Scaler","CardID":
"thisissometextforid506"}},{"Card":
{"CardStatusID":2,"CardStatusLabel":"Ready",
"CardTypeID":50,"CardTypeLabel":"VPU Scaler","CardID":
"thisissometextforid507"}},{"Card":
{"CardStatusID":2,"CardStatusLabel":"Ready",
"CardTypeID":50,"CardTypeLabel":"VPU Scaler","CardID":
"thisissometextforid508"}}]}}}}}
◦ System—System name and index.
◦ FrameCollection—Collection of frames in a system containing frame information.
◦ Frame—Contains frame information.
◦ Id—Mac Id of the frame.
◦ Name—Name of the frame.
◦ Contact—Contact information.
◦ Version—Current version of the software installed on the frame.
◦ OSVersion—Current OS version installed on the frame.
◦ FrameType—0: E2, 1:S3, 2: Ex.
◦ FrameTypeName—Type of the frame: E2/S3/Ex.
◦ Enet—Ethernet settings.
◦ SysCard—System card information.
◦ Slot—List of Input/Output/Expansion card information.
- success: (0=success, anything else is an error)
• Example:
- {"params":{}, "method":"getFrameSettings", "id":"1234", "jsonrpc":"2.0"}
listAuxContent
• Definition:
- This API shows Aux destination information.
• Request:
- params: {"id" : x}
◦ id—Index of the Aux destination.
• Response:
- response: {"id":0,"Name":"AuxDest1","PvwLastSrcIndex":0,"PgmLastSrcIndex":0}
◦ id—Index of Aux destination.
◦ Name—Name of Aux destination.
◦ PvwLastSrcIndex—Input/Background source index in the preview area.
◦ PgmLastSrcIndex—Input/Background source index in the program area.
- success: (0=success, anything else is an error)
• Example:
- {"params": {"id": 0}, "method":"listAuxContent", "id":"1234", "jsonrpc":"2.0"}
changeAuxContent
• Definition:
- This API changes the source in the Aux destinations.
Remote Control Protocol