About this manual
2 Manpack Transceiver 2110 series Reference Manual
Section 19 VP-116 voice encryptor option—explains how to set up and use a VP-116
voice encryptor
Section 20 AES-256 digital data encryptor option—describes the on-board RM50 HF
Data Modem, how to set up the transceiver to operate with the modem, and
how to connect the transceiver to a computer
Section 21 Using the transceiver in free tune and Amateur Mode—explains how to use
the transceiver in free tune, how to create channels during free tune, and
provides the frequency bands for Amateur Mode
Section 22 Hot keys—explains how to set up, manage and use hot keys
Section 23 Connectors—explains the connectors on the 2110 series Manpack
Transceivers, its battery packs, and the interface adaptor
Section 24 System messages—explains the system messages that may be displayed on
the front panel screen
Section 25 Specifications—lists the specifications of the 2110 series Manpack
Transceivers
Appendix A Hot key examples—provides examples of hot keys and how to create them
Appendix B Get Status calls—explains the information you can retrieve from another
transceiver by making a Get Status call to that transceiver
Appendix C Forgotten passwords—explains what to do if you have forgotten the
password for the transceiver
Appendix D Operating the transceiver from a computer—explains how to operate the
transceiver from a computer using CICS (2110 only)
Appendix E Compatibility between CICS V2 and V3.00 (or later)—describes the
compatibility issues between CICS V2 and V3.00
Appendix F Controlling user access—describes the Message 10 entries and how to use
them
Appendix G Compliance—compliance information and safety notices
There is an index at the end of this manual.
To Next Page
Loading...
Need help?
General
