Using lists
116 Manpack Transceiver 2110 series Reference Manual
Saving call log information to the Address List
If you receive a call from another station, or make a new call to another station, an entry
is recorded in the Calls In Log or Calls Out Log respectively. You can save this
information to the Address List using the List Manager, then use this entry for
subsequent calls. If the received call contains GPS information, this can also be saved.
When you access this entry in the Address List, and you have a valid GPS location
entered for your station, the distance and bearing to the remote location is displayed.
If a call is received from a station that has an entry in the Address List, the name of this
entry is used to identify the incoming call.
To save call log information to the Address List:
1 Press # once to go to the Calls Out Log, or twice to go to the Calls In Log.
1 Go to the entry you want to save to the Address List.
1 Hold to open the List Manager.
1 Scroll to Save to Address, then press .
The transceiver suggests a name for the entry, based on any name associated with
the caller address.
1 Enter the name of the entry, then press .
If you enter a name that is already used in the Address List, and you want to replace
the contents of this entry, press .
NOTE
You can save call log information to the Address List if Option GPS
Enable is installed.
NOTE
Automatic distance and bearing calculations only occur when Option GPS
Enable is installed.
NOTE For help with entering text see page 72, Entering and editing text.
To Next Page
Loading...
Need help?
General
