Making and receiving calls
Manpack Transceiver 2110 series Reference Manual 217
Figure 36: The Calls Out Log showing a NET call made (MIL-STD-188-141B
ALE option, 2110 only)
Up to 20 calls can be stored at one time and you can repeat any of these calls directly
from the log (see page 218, Repeating a call from the Calls Out Log).
The calls are listed in the order in which they were made with the most recent call at the
top of the list. If you make two or more calls with the same call type and address (and
message or GPS position, if applicable), only the most recent call is kept in the log.
If you make a Get Position or Get Status call, an entry for the call is created in the Calls
Out Log, and the information that is sent to you by the other station is stored in an entry
for the call in the Calls In Log (see page 221, The Calls In Log).
Displaying an entry in the Calls Out Log
To display an entry in the Calls Out Log:
1 Press CALL LOGS to open the Calls Out Log.
The details of the last call sent are displayed.
1 Scroll through the entries.
1 To display more information about an entry, press .
1 Scroll through the settings.
1 Press to return to the entry.
1 Press to close the Calls Out Log and return to the screen from which you began.
NET call
icon
date on which
call was made
name of NET to which
call was made
time at which
call was made
To Next Page
Loading...
Need help?
General
