The Address List
Manpack Transceiver 2110 series Reference Manual 181
Saving GPS information
You may find it useful to save certain GPS information in your transceiver. For example,
a mobile station could broadcast its GPS information from a particular situation (a road
block or the site of an emergency), then this information may be saved to the Address
List, thus providing access to distance and bearing information for the location (see
page 116, Saving call log information to the Address List).
Another use is saving a location as a waypoint in the Address List (for example, your
campsite) so that you may return easily to it using the distance and bearing information
relative to your current GPS receiver location. For more information see page 118,
Saving GPS information to the Address List. For example, if you save the location of
your campsite to the Address List with the name Bob’s campsite, then decide that you
would like to send Fred this information, all you need do is go to the Bob’s campsite
entry in the Address List, press CALL, enter Fred’s address, then continue with the call.
Fred receives a call titled Bob’s campsite with distance and bearing information. If
you want to encrypt your GPS information so that it may only be accessed by authorised
users see page 146, Privacy Mode.
NOTE
You can store GPS information in the Address List if Option GPS Enable
is installed.
NOTE
For more information on sending calls to several stations see page 198,
Group calls in a Codan Selcall network and page 186, Special ALE
address syntaxes.
To Next Page
Loading...
Need help?
General
