Compliance
492 Manpack Transceiver 2110 series Reference Manual
Electrical safety
To ensure compliance with the European Low Voltage Directive is maintained, you must
deploy and use the 2110 series Manpack Transceiver and antennas in accordance with
the instructions in the Manpack Transceiver 2110 series Getting Started Guide, the
Quick Reference Card supplied with each antenna, and the Manpack Transceiver
2110 series Reference Manual.
When using equipment that is connected directly to the AC mains these precautions must
be followed and checked before applying AC power to the unit:
1 Use the standard AC mains cable supplied.
1 Ensure the covers for the equipment are fitted correctly.
The 3121 AC Battery Charger and 3123/3523 Fast AC Battery Charger are double
insulated and marked with .
Batteries
Battery cells are electrically live at all times and must be treated with extreme caution.
They may supply high short-circuit currents even if they appear to be damaged or
inoperable.
Batteries should be used to provide power to the transceiver only, using the supplied
connectors.
The batteries will not charge at temperatures higher than 40°C (104°F).
Earth symbol
An antenna earth connection point is provided on the 2110 series Manpack Transceiver.
The symbol shown in Table 83 is used to identify the earth on the equipment.
CAUTION
If it is necessary for a qualified electronics technician to remove the
covers during servicing, they must be refitted correctly before using
the equipment.
WARNING
The protective cover must always be fitted when the 3121 AC
Battery Charger or 3123/3523 Fast AC Battery Charger is connected
to the AC mains.
Table 83: Earth symbol
Symbol Meaning
Antenna earth
To Next Page
Loading...
Need help?
General
