Hot keys
Manpack Transceiver 2110 series Reference Manual 343
Macro
operates?
Immediately Perform the task immediately without displaying the screen involved.
For example, select a new channel without displaying the channel
screen in the Channel List.
Before pause Perform the task immediately, save the new value if the macro
changed a value, briefly display the screen involved, then return to the
screen you were on when you pressed the hot key.
For example, select a new channel, briefly display the channel screen
in the Channel List, then return to the screen you were on when you
pressed the hot key.
NOTE
To change the length of time the screen is displayed, use the
Macro Pause entry in the Control List.
After pause Perform the task immediately, briefly display the screen involved,
save the new value if the macro changed a value, then return to the
screen you were on when you pressed the hot key. (If the macro
changes a value, the pause gives you a chance to cancel the change
before it is saved by pressing .)
For example, change a value in a Control List entry, briefly display
the entry, save the change, then return to the screen you were on when
you pressed the hot key.
NOTE
To change the length of time the screen is displayed, use the
Macro Pause entry in the Control List.
Wait Perform the task immediately, then remain on the screen involved.
Table 41: Macro options (cont.)
Option Setting Select this option if you want the macro to...
To Next Page
Loading...
Need help?
General
