Using lists
118 Manpack Transceiver 2110 series Reference Manual
Saving GPS information to the Address List
If you have a GPS receiver connected and configured to operate with your transceiver,
you can record your current GPS information from the receiver as a waypoint in the
Address List. For information on saving GPS information sent to you from another
station see page 116, Saving call log information to the Address List. Any GPS
information that is saved to the Address List displays the distance and bearing to this
location from your transceiver’s known location.
To save GPS information to the Address List:
1 In any list other than the Address List, hold .
1 Scroll to Save Waypoint, then press .
1 Enter the name of the entry, then press .
If you enter a name that is already used in the Address List, and you want to replace
the contents of this entry, press .
The entry in the Address List is created and the List Manager closes.
NOTE
You can save GPS information to the Address List if Option GPS Enable
is installed.
NOTE
Automatic distance and bearing calculations only occur when Option GPS
Enable is installed.
NOTE For help with entering text see page 72, Entering and editing text.
To Next Page
Loading...
Need help?
General
