AES-256 digital data encryptor option
330 Manpack Transceiver 2110 series Reference Manual
Operating the data modem
For information on operating the RM50 HF Data Modem with the RC50-C HF Email
Gateway software, see the documentation provided with this software.
Uninstalling the data modem
If the RM50 HF Data Modem is no longer being used, and you want to remove it
physically from the system, you may also want to remove it from the memory of the
transceiver. The address of the modem remains in the transceiver and is used during
soundings. If the modem is being permanently removed and you do not want to continue
with soundings to this address, you must refresh the addresses in the site manager
information.
To remove the RM50 from the memory of the transceiver:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Devices, then press .
1 Scroll to Uninstall: RM50, then hold .
A pop-up showing Modem info: Removed: RM50 is displayed.
1 Press until Main Menu is displayed.
To remove the RM50 from the site manager information:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to ALE LQA Clear, then hold .
1 Scroll to Refresh addresses, then press .
1 Press until Main Menu is displayed.
NOTE
In the following discussion, you must log in as administrator to see the
entries in the Control List (see page 128, Logging in to admin level from
user level).
To Next Page
Loading...
Need help?
General
