The Control List
264 Manpack Transceiver 2110 series Reference Manual
Messages entry
You can store up to 10 messages in the Messages entry for use in Message calls. When
you make one of these calls, you can scroll through these messages, then select and/or
edit the one you want to send.
To pre-type and store a message:
1 Press CALL.
1 Scroll to Message?, then press .
1 Scroll to the setting in which you want to enter your message, then hold .
1 Enter the message, then press .
1 Press or PTT to cancel the call.
NOTE
If a Message entry is locked at admin level, you are not able to edit the
message during a call.
NOTE
The Message 10 entry is a special entry that accepts configuration
commands. For more information on using this entry see page 467,
Controlling user access.
NOTE For help with entering text see page 72, Entering and editing text.
To Next Page
Loading...
