Codan 2110 series User Manual

Operating the transceiver from a computer
412 Manpack Transceiver 2110 series Reference Manual
Terms used in CICS and the 2110 Manpack Transceiver
The terms used in several CICS commands differ from those used in the transceiver.
Table 65 lists these commands and the equivalent 2110 Manpack Transceiver terms.
Table 65: CICS commands and the equivalent 2110 Manpack Transceiver
terms
CICS commands Equivalent term in the transceiver
alebeacon Channel Test call using an ALE/CALM network
alecall Selective call using an ALE/CALM network
aletelcall Phone call using an ALE/CALM network
beacon Channel Test call that is independent of the call system
gpsbeacon Get Position call using an ALE/CALM or a Codan Selcall
network
gpsposition Send Position call using an ALE/CALM or a Codan Selcall
network
pagecall Message call using an ALE/CALM or a Codan Selcall network
selbeacon Channel Test call using a Codan Selcall network, or non-alpha
address in an ALE/CALM network
selcall Selective call using a Codan Selcall network, or non-alpha
address in an ALE/CALM network
selfid Your station self address
statuscall Get Status call using an ALE/CALM or a Codan Selcall
network
telcall Phone call using an ALE/CALM or a Codan Selcall network

Codan 2110 series Specifications

General

Brand	Codan
Model	2110 series
Category	Transceiver
Language	English