Codan 2110 series User Manual

Controlling user access
470 Manpack Transceiver 2110 series Reference Manual
Controlling access to the List Manager
You can specifically allow or restrict access to the List Manager. The configuration
command for allowing access to the List Manager begins with #$! LMA-. The
configuration command for restricting access to the List Manager begins with #$! LM-.
Follow either of these commands with the codes you want to use from Table 73. Separate
the commands with a comma.
CAUTION Do not use the LMA and LM commands at the same time.
Table 73: Codes for controlling access to the List Manager
Code Individual codes Description
Ad
(Advanced)
Restricts access to the Advanced... features in the List
Manager via the Quick Start menu, but provides the
option of logging in to admin level.
NOTE
The action of this code is the same, regardless of
whether it is used with the LMA or LM prefix.
AO
(Administration Only)
Controls access to the List Manager at admin level only.
NOTE
The action of this code is the same, regardless of
whether it is used with the LMA or LM prefix.
BIT
(Built-in Test)
Controls access to built-in tests (see page 252, Selecting a
built-in test).
Cfg
(Config...)
Controls access to the Config... menu, that is, HP, UH,
UL, and ULO.
NOTE
If you set Cfg, you do not need to set the
individual codes within the menu.
HP
(Home Page)
Controls access to changing the home screen (see
page 111, Setting the home screen).
UH
(User Hide)
Controls access to changing the hide or show status of an
entry at user level (see page 131, Hiding and showing
information).
UL
(User Lock)
Controls access to changing the locked or unlocked status
of an entry at user level (see page 133, Locking and
unlocking information).
ULO
(User Locks Off)
Controls access to toggling between locks off and locks
on at user level (see page 134, Switching locks off or on at
user level).

Codan 2110 series Specifications

General

Brand	Codan
Model	2110 series
Category	Transceiver
Language	English