Codan 2110 series User Manual

Operating the transceiver from a computer
446 Manpack Transceiver 2110 series Reference Manual
Summary of command syntax
Table 68: Summary of CICS command syntax
Command syntax Function
alebeacon <address of called
station>[@<network>] [±lbt]
[±lqa] [±scan] [s] [from <self
address>[@<network>]]
Makes a Channel Test call to addressed stations using
any, or the specified, ALE/CALM network from the self
address specified.
alecall <address of called
station>[@<network>] [±lbt]
[±lqa] [±scan] ["<amd>"]
[from|tis|twas <self
address>[@<network>]]
Makes a call to addressed stations using any, or the
specified, ALE/CALM network from the self address
specified.
aletelcall <address of called
station>[@<network>] [±lbt]
[±lqa] [±scan] <telephone
number> [from <self
address>[@<network>]]
Makes a Phone call to addressed stations using any, or the
specified, ALE/CALM network from the self address
specified.
amd "<message>" Sends a message within the established CICS ALE link.
beacon <address of called
station>[@<network>] [±lbt]
[±lqa] [±scan] [s] [from <self
address>[@<network>]]
Makes a Channel Test call to addressed stations using
any, or the specified, ALE/CALM or Codan Selcall
network. This type of beacon is independent of the call
system.
call <address of called
station>[@<network>] [±lbt]
[±lqa] [±scan] ["<amd>"] [from
<self address>[@<network>]]
Makes a call to addressed stations using any, or the
specified, ALE/CALM or Codan Selcall network from
the self address specified.
chan [<name>] Displays the current channel, or switches to the channel
specified.
echo [off|on|<text>] Displays the current echo status, or switches to half
duplex mode (off) or full duplex mode (on, default).
freq [<frequency>] Displays the common receive/transmit frequency or the
separate receive and transmit frequencies (in kHz) for the
current channel, or selects the channel that has the receive
frequency specified (in kHz). If the channel with the exact
receive frequency is not found, the channel with the next
higher frequency is selected.
gpsbeacon <address of called
station>[@<network>] [±lbt]
[±scan] [from <self
address>[@<network>]]
Makes a Get Position call to an addressed station using
any, or the specified, ALE/CALM or Codan Selcall
network from the self address specified.

Codan 2110 series Specifications

General

Brand	Codan
Model	2110 series
Category	Transceiver
Language	English