About this manual
6 Manpack Transceiver 2110 series Reference Manual
Glossary
TPE transmit program enable
TWAS ALE keyword ‘this was’
Tx transmit
TxD transmit disabled
TxE transmit enabled
TxP transmit prohibited
USB upper sideband
UTC universal time coordinated
UV ultraviolet
V firmware/software version
This term... Means...
address The HF transceiver equivalent of a telephone number. Your
station self address is used by other stations to call you, and it is
sent when you make calls to identify you as the caller. It is
sometimes referred to as an ID, a station ID, or a self ID.
ALL call An ALE address syntax used to broadcast to any station that is
tuned to the same frequency in an ALE/CALM network, or
scanning the network. The ALL call uses a special address
syntax @?@ that ALE stations recognise.
A selective ALL call addresses a subset of stations. A multiple
selective ALL call addresses these subsets within the one call.
The global ALL address syntax may be used in Emergency,
Message, Phone, Selective, and Send Position calls if the FED-
STD-1045 ALE/CALM option is installed. Selective ALL calls
may be made in these call types if the MIL-STD-188-141B ALE
option is installed (2110 only).
ANY call An ALE address syntax used to broadcast to any station that is
tuned to the same frequency in an ALE/CALM network, or
scanning the network. The ANY call uses a special address
syntax @@? that ALE stations recognise.
A selective ANY call addresses a subset of stations. A multiple
selective ANY call addresses these subsets within the one call.
The ANY address syntax may be used in Emergency, Message,
Phone, Selective, and Send Position calls if the MIL-STD-188-
141B ALE option is installed (2110 only).
This term... Means...
To Next Page
Loading...
Need help?
General
