Codan 2110 series - Help Command; Lbt Command

Operating the transceiver from a computer
426 Manpack Transceiver 2110 series Reference Manual
help command
Use the help command to:
• display the categories of help available
• display command details within categories
Syntax
help
help <category>
where:
help displays the categories of help available.
<category> displays detailed help for the commands within the specified category.
lbt command
Use the lbt command to:
• display the global LBT Mode
• perform a check on the current channel for the presence of data or voice
Syntax
lbt
lbt measure
lbt output
lbt output off|on
lbt override occupied
lbt override vacant
where:
lbt displays the current LBT Mode.
measure checks the current channel for the presence of data or voice.
output displays the progress messages for LBT and whether the channel is occupied or
vacant.
output off|on switches the progress messages for LBT off or on.
override occupied|vacant makes a call on a channel where LBT has detected
that the channel is occupied or vacant.