Hot keys
Manpack Transceiver 2110 series Reference Manual 345
Moving a macro
Use the Move macro entry in the List Manager to:
• move a macro from one key to another
• change the order in which macros are listed on a hot key
• move a macro to or from the Unassigned entry in the Keypad List
To move a macro:
1 Hold to open the List Manager.
1 Scroll to Macros..., then press .
1 Scroll to Move macro, then press .
1 Do one of the following:
• Press the key to which the macro you want to move is assigned.
• Press to go to the Unassigned entry.
The macros assigned to the key or entry are displayed.
If there are no macros assigned to the key or entry, (none) is displayed. Press to
go back a step, then press the key to which the macro is assigned.
1 Scroll to the macro you want to move, then press .
1 Press the key to which you want to move the macro.
If you want to move the macro to the Unassigned entry in the Keypad List, press .
The macros assigned to the key or entry are displayed. At the end of the list, or if no
macros are assigned to the key or entry, <end> is displayed.
If you pressed the wrong key, press to go back a step, then press the key to which
you want to assign the macro.
1 Scroll to the macro you want to have in the list immediately after the moved macro,
then press .
To insert the macro at the end of the list, scroll to <end>, then press .
The macro is moved and the List Manager remains open.
NOTE
You cannot move macros to or from the Special entry in the Keypad List,
but you can copy them and rename the copies if necessary.
To Next Page
Loading...
Need help?
General
