AES-256 digital data encryptor option
326 Manpack Transceiver 2110 series Reference Manual
Using the AES-256 digital data encryptor with a voice
encryptor
The AES-256 digital data encryptor may be used simultaneously with the AES-256
digital voice encryptor option or the CES-128 voice encryptor option. When a voice
encryptor option and the digital data encryptor option are available, both are activated
simultaneously via the SEC key.
Using the AES-256 digital data encryptor with the AES-256 digital voice
encryptor
When you use the AES-256 digital voice and data encryptor options together, they
provide security using the same secure key. When programming the devices with secure
keys either via KMS or the front panel, ensure that RC50-C HF Email Gateway is
launched and the data modem is active. This maintains secure key information across the
devices.
Using the AES-256 digital data and voice encryptors
To use the AES-256 digital data and voice encryptors:
1 Launch the RC50-C HF Email Gateway software to activate the RM50 HF Data
Modem.
The transceiver responds with a beep and displays Modem info: Connected.
1 Press SEC.
The transceiver responds with two high short beeps, and displays Voice & Data
with the secure index used. For example:
If you are in the Channel List, the active AES-256 digital voice encryptor is
indicated by the text TEK <index> <1k2|2k4> at the left of the channel screen. For
example:
To Next Page
Loading...
Need help?
General
