The Control List
Manpack Transceiver 2110 series Reference Manual 251
Devices entry
The Devices entry in the Control List enables you to display information specific to the
transceiver. You can display the:
• list of built-in tests
•ESN
• features installed and enabled in the device
• version of firmware installed
• product name
• lists stored in the device
You can also use the Devices entry to install new options and to rename the device.
Figure 45 shows the type of information that you can display about the device and the
lists that are stored in the device.
Figure 45: The Devices entry in the Control List
NOTE
In the following discussion, you must log in as administrator to see the
Control List (see page 128, Logging in to admin level from user level).
NOTE
The NET List is available if you have the MIL-STD-188-141B ALE
option installed (2110 only).
Devices
Control List
Built-in test
Serial number
Option code
Firmware version
Product name
Rename device
Mode
Network
Keypad
Address
Control User
Control Tcvr
Channel
Calls In
Calls Out
Phone Link
2110 SSB Transceiver
Tcvr features
Uninstall: RM50
NET
To Next Page
Loading...
