Using lists
Manpack Transceiver 2110 series Reference Manual 113
Making changes to all other lists
The following steps can be used to make changes in every list except the Control List
(see page 112, Changing a setting in the Control List).
Creating an entry in a list
To create an entry in a list:
1 Select the list in which you want to create an entry.
1 Hold to open the List Manager.
1 Scroll to Create entry, then press .
The transceiver suggests a name for the new entry based on the name of the entry
you were on. For example:
1 Enter the name you want to use for the new entry.
The name must be unique to the list that you are in.
1 Press .
The transceiver prompts you to enter settings for the entry.
The new entry is created and the List Manager remains open.
1 If you want to view the entry you have created, press to close the List Manager.
NOTE
In the following examples, you must log in as administrator to see the lists
(see page 128, Logging in to admin level from user level).
NOTE For help with entering text see page 72, Entering and editing text.
For information on settings in the... See...
Channel List page 136
Network List page 144
NET List (MIL-STD-188-141B ALE option, 2110 only) page 158
Phone Link List page 166
Address List page 171
To Next Page
Loading...
Need help?
General
