AES-256 digital data encryptor option
Manpack Transceiver 2110 series Reference Manual 315
Setting up the transceiver
To set up the transceiver:
1 Switch on the transceiver.
1 Access the Control List in the transceiver.
1 Set the RS232 Mode entry to Modem Hold AGC, and the RS232 Speed entry to
9600.
1 Check that the names of ALE/CALM networks in the transceiver match the
HF Network names set in the RC50-C HF Email Gateway software.
1 Switch off the transceiver.
Installing the driver for the cable
To install the driver for the cable:
1 Insert the RC50-C Installation CD into the CD drive of the computer to which the
cable is connected.
1 Click on Install RC50-C.
The driver comes packaged with the software. It remains present even if RC50-C is
uninstalled.
1 If the driver provided on the RC50-C Installation CD is not suitable for your
computer, do the following:
• Download a suitable Windows
®
-certified driver from
www.ftdichip.com/Drivers/VCP.htm.
• Double-click on the self-extracting .exe file.
NOTE
Some older drivers are delivered as a zip file. Extract the files (using
folder names) from the zip file. Right-click on the ftdibus.inf file,
then select Install.
To Next Page
Loading...
Need help?
General
