Codan 2110 series User Manual

Manpack Transceiver 2110 series Reference Manual 461
Appendix E Compatibility between CICS V2
and V3.00 (or later)
There are a number of compatibility issues between CICS V2 and V3.00 (or later).
There are differences in:
• using = and ? to initiate a query or an action
• naming of channels
• selecting channels to be scanned
• using upper and lower-case text
• using quotation marks so spaces are recognised in text
• structuring IDs (self addresses)
For a brief outline of compatibility issues between CICS V2 and V3.00 (or later) see
Table 71.
NOTE
CICS V2 is present in older Codan HF transceivers. CICS V3.00 or later
is present in all NGT Transceivers.
Table 71: Compatibility issues between CICS V2 and V3.00 (or later)
Feature CICS V2 CICS V3.00 (or later) See...
Use = and ? to initiate a
query or an action
= defines an action.
? defines a query.
Commands followed by text
characters are treated as
actions. Commands entered on
their own are treated as
queries.
page 462
NOTE = and ? still work.
Channel names All channels must be named
numerically.
Channels can be named
alphanumerically.
page 463
Scanning Scan tables are used. Networks are used. page 463
Text All text is converted to upper-
case letters unless it is within
quotation marks, then the text
remains as typed.
Text is recognised in upper-
case or lower-case letters.
page 464
Use of quotation marks
to recognise spaces in
text messages
Only applicable when written
messages are expected, for
example, a message in a
Message call. For spaces to be
included in these messages, the
text must be within double
quotes.
Single or double quotes are
applicable to any text.
page 464
Address Addresses cannot be specified
with a network.
Addresses can be specified
with or without a network.
page 465

Codan 2110 series Specifications

General

Brand	Codan
Model	2110 series
Category	Transceiver
Language	English