Hot key examples
388 Manpack Transceiver 2110 series Reference Manual
Example 1: selecting a specific channel
This example shows you how to create a macro to select a specific channel in the
Channel List.
When you run this macro, the transceiver:
• opens the Channel List
• selects the channel specified in the macro
• briefly displays the new channel
• returns you to the screen you were on
To create this macro:
1 Press VIEW until the channel screen is displayed.
1 Scroll to the channel you want the macro to select.
1 Hold to open the List Manager.
1 Scroll to Macros..., then press .
1 Scroll to Create macro, then press .
The transceiver asks you to select the action you want the macro to perform.
1 Scroll to Go to this chan, then press .
The transceiver asks you to select the timing with which the macro operates.
1 Scroll to Before pause, then press .
1 Press the key to which you want to assign the new macro.
1 Scroll to the macro you want to have in the list immediately after the new macro,
then press .
1 Type a name for the macro, then press .
The macro is created and assigned to the key, and the List Manager remains open.
NOTE
When you use a macro to select a channel, the channel is always
selected before the channel screen is displayed. You can therefore
select Before pause or After pause. The end result is the same.
To Next Page
Loading...
