Operating the transceiver
92 Manpack Transceiver 2110 series Reference Manual
Displaying the local time and date
To display the local time and date:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Time..., then press .
1 Scroll to Screen, then hold .
The time screen is displayed.
1 Press until Main Menu is displayed.
Entering your station self address
Your station self address is the address used by other stations to call you, and it is sent
when you make calls to identify you as the caller. You can enter up to 10 self addresses
for your 2110 series Manpack Transceiver, or 20 self addresses if you have the MIL-
STD-188-141B ALE option installed (2110 only). This section explains how to enter,
edit and delete station self addresses.
Entering a self address
To enter your station self address:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Address, then press .
If a self address has not yet been entered, the List Manager is displayed.
If one or more self addresses have already been entered, the screen displays the first
self address. Hold to open the List Manager.
NOTE
In the following discussion, you must log in as administrator to see the
Main Menu (see page 128, Logging in to admin level from user level).
NOTE
In the following discussion, you must log in as administrator to see the
entries in the Control List (see page 128, Logging in to admin level from
user level). If you want to view a self address when you switch on your
transceiver see page 267, Welcome text.
To Next Page
Loading...
Need help?
General
