Operating the transceiver
Manpack Transceiver 2110 series Reference Manual 91
Adjusting the local time and date
If the local time and date are not correct after setting your time zone offset from UTC
time, adjust the local time and date.
To adjust the local time and date:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Time..., then press .
1 Scroll to Local, then hold .
The cursor is placed under the year.
1 Scroll through the values until the one you want is displayed, then press to go to
the next setting.
To go to the previous setting, press .
1 Repeat the previous step until the date and time are correct.
1 Press after setting the seconds to save your changes.
1 Press until Main Menu is displayed.
To Next Page
Loading...
