Using lists
104 Manpack Transceiver 2110 series Reference Manual
The Main Menu
All the details required to operate the transceiver, such as the self address of your station
and the channels and networks you use, are stored in lists. Each list relates to a particular
area of the transceiver’s operation. The lists containing information specific to the
operation of your transceiver are:
• the Address List, which stores the details of stations you often call
• the Channel List, which stores the details of the channels you use
• the Control List, which stores the settings that control the way the transceiver
operates, for example, the brightness and contrast of the front panel screen, the time
and date, passwords, and your station self address
• the NET List, which stores information about the NETs that you use, whether or not
you are a member of these NETs, and the network used with each NET (MIL-STD-
188-141B ALE option, 2110 only)
• the Network List, which stores information about the networks you use and the
channels used in each network
• the Phone Link List, which stores the details of telecommunication stations you
contact to make telephone calls from the transceiver
The lists are displayed in the Main Menu without the word ‘list’ after them.
Figure 20: The contents of the Main Menu
NOTE
In the following discussion, you must log in as administrator to see the
Main Menu (see page 128, Logging in to admin level from user level).
Main Menu
Address
Channel
Control
Phone Link
Network
NET
To Next Page
Loading...
Need help?
General
