Codan 2110 series User Manual

The NET List
162 Manpack Transceiver 2110 series Reference Manual
Programming the NET List
Creating a NET
When you create a NET, the transceiver prompts you for various details. It is
recommended that you read page 158, Settings in the NET List before you create a NET.
To create a NET:
1 Press until Main Menu is displayed.
1 Scroll to NET, then press .
1 Use the List Manager to create an entry (for help see page 113, Creating an entry in
a list and page 72, Entering and editing text).
1 Enter the setting information provided in the following table as required, then
press to enter the information.
NOTE
In the following discussion, you must log in as administrator to see the
NET List (see page 128, Logging in to admin level from user level).
If this prompt is
displayed...
Do this...
Address? • enter the address of the NET you want to use for
the NET call
NOTE
If you leave this setting blank, the NET
cannot be used.
Network? • select the network you want to use for the NET
call
NOTE
If you select <Disabled>, the NET cannot
be used.
Member Address? • enter the self address of the first member of the
NET
Add another Member
Address?
• enter the self address of the next member of the
NET
NOTE
If you do not want to add another member
address, press .
Outgoing Calls? • select whether or not your station can make NET
calls from this NET
Incoming Calls? • select whether or not your station can receive
NET calls on this NET as a member of the NET
(Members only or Disabled), or
• select whether or not your station can receive
NET calls on this NET if you are not a member
of the NET (Enabled or Disabled)

Codan 2110 series Specifications

General

Brand	Codan
Model	2110 series
Category	Transceiver
Language	English